After the engine key is withdrawn or switched to the ACC as well as locked position, the headlights will stay on for the same amount of time (in minutes). However, after fifteen seconds, the headlights will switch themselves off if the driver’s door opens and then closes again. If you want to know more about Headlamp Delay, we suggest you keep reading this article!
READ MORE:
- How Many Lumens Do I Need For A Headlamp?
- Best Headlamp For Trail Running at Night
- What Is The Best Headlamp For Running
Headlamp Delay – Switching on and off
Two clicks of either the lock icon on transmitter or digital key are required to turn off the headlights. Alternatively, the headlamps may be switched off by moving the light switch away from the headlight and turning it off. You have the option of turning on or turning off the headlamp delay function.
In the event that the driver exits the vehicle by any door other than the driver’s door, the battery saving feature will not activate. As well as the headlamp delay function will not switch off the lights automatically. As a consequence, it brings about the drain of the battery. You need to make sure that the lights are turned off before you get out of the car.
If The Headlamps are not Correctly Aligned, Reaction time can be Reduced to Zero
It is essential to have good headlights so that you can see where you are going. However, those bulbs won’t be of any use if they aren’t pointed in the appropriate direction towards the road, which is something that a lot of car owners fail to do or just completely ignore when they have a vehicle.
consequences of Headlamp Delay
The headlights of a vehicle might become misaligned with the passing of time or even just by changing the bulb. This might result in diminished sight, which is a significant hazard while operating a vehicle during the night. If something darts onto the road when you are going at sixty miles per hour, you will only have a few seconds to react in order to prevent a collision. Lights that are not properly aligned might make your response time equal to zero.
Headlamp Delay – How to Make Adjustments?
The procedure of adjusting the headlights is simple, but it may be a tedious one at times. It also takes some time to get it exactly right since each vehicle is unique. You just need a little bit of time and some patience to learn how to do this in your own driveway. All you need is some practice.
The Process behind it
To begin, check to see whether your vehicle has structured bubble levels that are designed to assist you in properly aligning the headlights. For instance, many automobiles are equipped with both upright and straight bubble levels, which makes it simple to determine whether or not the driver’s headlight aim is appropriate. Typically, you may find them on either the top or the sides of the headlamp unit. You may adjust the aim of the bubble with these , until it is positioned in the centered area of the level.
A feature on headlamps that helps save battery life
The “Save Battery Life” function is designed to stop the battery from discharging all the way, which is the intended outcome. After the driver has stopped the vehicle, opened the driver-side door, and turned off the engine, the system will automatically switch off the position light.
If the driver stops the vehicle at the end of the road on darkness when this function is enabled, the position lighting will switch off automatically. Open the door to the driver’s side of the vehicle. Then use the light switch located on the steering wheel to turn off and then back on . This will allow the lights to remain on even after the engine has been turned off.
Setting the time headlights will remain on before automatically shutting off the vehicle
The capability of your car’s auto headlights provides you with both comfort and security. When you switch off the engine, the exit delay will cause the lights to remain on for a predetermined amount of time after you have turned off the engine. You have the ability to choose how long they remain active to meet your requirements.
The Procedure
Check that the switch for the headlights is set to the Auto position. Turn off the headlight switch, then turning it back through its on and off positions. Place the switch in the Auto position and turn it on. See to it that the lights are turned on. After the length of time that you want the headlamps to remain on, turn the switch off again. At this point, you should program the delay in the headlights.